Φ400 Electric Motorized Pulley Heavy Duty Split Type Support Bracket Model 404 HT250 Cast Iron M30 Bolts 210kN

Φ400 Electric Motorized Pulley Heavy-Duty Split-Type Support Bracket Model 404 HT250 Cast Iron M30 Bolts 210kN

Model 404 Heavy-Duty Electric Motorized Pulley Support Bracket (Bearing Housing)

The Model 404 support bracket is a heavy-duty split-type bearing housing designed for Φ400 medium electric motorized pulleys in demanding industrial environments. Cast from HT250 high-strength grey cast iron with an overall thickened box body, double-layer reinforcement ribs, and a wide split mating surface, it delivers 210kN radial load capacity for mining, quarry, and material handling conveyor systems.

Key Specifications

Product Features

• High-Strength HT250 Casting: Superior tensile strength compared to HT200, specifically engineered for medium to heavy-duty mining and quarry conveyor loads.
• Thickened Box Body with Double Ribs: Overall reinforced structure with double-layer reinforcement ribs delivers exceptional impact resistance and deformation resistance under heavy loads.
• Wide Split Mating Surface: Extended split joint area provides stronger locking rigidity, preventing bearing bore deformation and loss of roundness during operation.
• Large-Bore Bearing Chamber: Oversized bearing housing accommodates large spherical roller bearings, significantly boosting radial and axial load capacity.
• Precision Machined: Tightly controlled coaxiality and flatness tolerances ensure smooth, vibration-free drum rotation throughout extended operating cycles.

Manufacturing Process

Coated Sand Precision Casting → Stress-Relief Annealing → Heavy-Duty Boring and Milling → Drilling and Tapping → Quality Inspection

Applications

Purpose-built for Φ400 medium electric motorized pulleys in sand and gravel mining conveyors, coal belt conveyor systems, dock-side medium-duty handling lines, construction waste conveying equipment, and grain heavy-duty transfer lines.

Installation Notes

• Use matching M30 high-strength bolts exclusively — standard low-strength bolts are prohibited and will cause joint failure.
• Apply oil-resistant sealant on split mating surfaces to prevent dust and moisture ingress into the bearing chamber.
• Mounting plane height difference between both brackets must not exceed 0.05mm to prevent main shaft bending.
• In sand, gravel, and dust environments, replenish grease and clean bearing chamber dust accumulation every two weeks.
• During complete assembly lifting, load must be simultaneously applied to both double-ear mounting holes — single-point lifting is strictly prohibited.

Packaging

Finished precision parts: Individual bubble wrap with heavy-duty carton boxes. Bulk raw castings: Heavy steel pallet with waterproof stretch film wrapping and corner guards for edge protection.